VC 17m Thin Film Racing Antifouling

NOT SOLD FOR USE IN CALIFORNIA

Ideal for powerboats and racing sailboats, VC&#174 17m is the bottom paint industry’s original “non-stick” technology. A very flexible coating, VC 17m is also ideal for use on inflatables.

VC 17m incorporates a slick PTFE additive (similar to Teflon®) that markedly reduces friction and produces a smooth, low-drag surface – making it ideal for racing boats, but it works to make cruising boats go faster, as well.

Thin film technology makes this paint only 1/8th the thickness of a traditional bottom paint, so it adds practically no weight to smaller racing sailboats, and virtually eliminates film build-up.

With its modest charge of biocide, VC 17m is designed primarily for use in fresh water or low-fouling, cold salt waters – where it is typically used in single-season applications.

Its 20% copper component protects against fouling – including zebra mussels.

A “self-burnishing” paint, as it is applied, the VC 17m coating flows out to immediately create a hard, super smooth, racing finish that would normally take days of tiresome sanding and burnishing to achieve.

• Hard, smooth surface – suitable for racing sailboats and high-speed powerboats, as well as inflatables

• Single season protection, but can be extended with touch-ups or re-coating

• Suitable for fresh or low fouling saltwater, and trailered or rack-stored boats

• Can be hauled for extended periods and re-launched without losing its effectiveness

• Biocide – 20% by weight metallic copper (mixed in) protects against hard growth

• Contains copper – do not apply on aluminum hulls or outdrives

• Do not apply over soft or graphite antifouling paints

• Apply using short nap roller or airless spray (only); do not apply by brush

• Fast overcoating – dries in minutes, allowing for same day launchings

• No sanding required between coats

• Thinner: Special Thinner 216

• Theoretical coverage is 340 ft²/gallon, practical coverage is 300 ft²/gal (75 ft²/quart); 2 – 3 coats per season recommended (no sanding required); 8% solids (by vol.)

• Available in quart kits, only

Note – this is a two-component paint. Under the red top is a bag of powdered copper, which is mixed into the base paint before using.

Also – this paint takes several weeks of immersion to develop its final color, and it may not change color if above the true waterline.

Technical Specifications