Talon Semi-Hard Hybrid Ablative Antifouling Paint

Talon is a value-oriented bottom paint that provides some advantages of both hard and ablative antifouling paints.

Suitable for single season use, Talon is a copper-based, semi-hard, hybrid ablative/modified epoxy antifouling paint. It combats all types of marine fouling in fresh and salt water.

While Talon has the durability of a traditional hard paint so it can be used on higher speed hulls, it also features slow wearing ablative properties to help limit year-over-year paint accumulation and provide a smooth finish.

Talon works best on boats that are used on a regular basis.

• Contains 33.6% highest quality cuprous oxide

• Scrubbable without removing paint

• Better color consistency for color matching

• Can be applied over most antifouling coatings, especially other modified epoxy antifoulants; check for compatibility

• Suitable for fiberglass, wood, and steel hulls

• Contains copper – do not apply to aluminum hulls or outdrives

• Can be applied by brush, 3/8″ nap solvent resistant roller, or airless or conventional spray

• Thinner: Sea Hawk 2033 Cool Weather, 2035 Hot Weather (max. 10%)

• Theoretical coverage is 359 ft²/gallon; at least 2 coats recommended, 3 at waterline and high wear areas; 56% solids (by vol.)

NOTE – Prolonged atmospheric exposure of this product may detract from performance. Launch freshly painted boats within 30 days of application.

When overcoating a previously painted hull, refer to the Compatibility Chart image in this entry.

Technical Specifications