Value-oriented Fiberglass Bottomkote NT (New Technology) is formulated with a unique, dual resin technology that allows a boat owner to benefit from the advantages of both hard and ablative antifouling paints.
Fiberglass Bottomkote NT has the durability of a traditional hard paint, preventing premature wear-through and allowing it to be used on higher speed planing hulls.
At the same time, NT has a built-in slow polishing mechanism that keeps the hull clean and smooth and also slows the heavy paint build-up you can get year after year with a traditional hard antifouling paint. Its ablative characteristics require surface erosion to be most effective, meaning that Fiberglass Bottomkote NT works best on boats that are used on a regular basis.
Single season protection in low fouling cooler waters
Fast drying – paint and launch the same day
Suitable for both power and sailboats
Cuprous oxide biocide (25%)
Not for use on aluminum hulls or outdrives
Durable coat, yet minimizes build-up
Haul and relaunch without repainting (60 days max.)
Suitable for use on high speed boats (apply an extra coat)
Apply by brush, 3/8″ nap solvent resistant roller, or conventional or airless spray
Thinner for brush (Brush-Ease 433) or spray (Special Thinner 216)
Theoretical coverage is 400 ft²/gallon; 2 – 3 coats recommended, 3 on bare wood; 50% solids (vol.)
Technical Specifications
| Weight | 8.00 lbs |
|---|---|
| Dimensions (L × W × H) | 12.00 × 12.00 × 12.00 in |
