This fast-drying topcoat provides a long-lasting finish with excellent gloss and color retention. 

Awlcraft Acrylic Topcoat 2000 is a two-part acrylic urethane topside finish that provides a long-lasting buffable finish with outstanding gloss and color retention. This finish can be applied to properly prepared and primed fiberglass, wood, steel and aluminum substrates. Best results are achieved by following the complete Awlgrip system recommendations. For spray application only. 

Key Features

• Premium acrylic urethane topcoatFast drying acrylic 
• Superior flow-out and high glossLong lasting gloss
• Fast drying to reduce dust entrapment
• RepairableGood color retention 
• Easy to apply buffable finish Can be buffed and polished
• For spray application only

Physical Data

• Base Formulation: Two- Component Acrylic Urethane
• Finish: High-Gloss 
• VOC: 472 grams/liter or 3.9 lbs/gallon

Application

• Recommended Application Method: Spray only 
• Number of coats recommended: 2-3 
• Recommended Wet Film Thickness: 6-9 mils
• Recommended Dry Film Thickness: 2-3 mils
• Application Temperature: minimum 55°F (13°C) and maximum 105°F (41°C)
• Primer Needed:  545 Epoxy Primer or 321 HS Undercoat
• Coverage: 573 Sq. Feet (53m2)
• Converter:  Converter (G3010  )
• Cleaner: T0002 or T0003 Reducers

Drying Times* (Hours)

• To Recoat: Spray 1-4 Hours
• To Full cure : 14 days

*The above dry times are minimums. May be recorded after the minimum time shown. There is no maximum dry time before launching.

More information

For detailed application instructions and thinners see the Awlcraft 2000 Data Sheet. NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication.