AF-33 Ablative Formula Antifouling Paint

AF-33 copper-based, ablative coploymer paint has been re-formulated to be a harder, more durable antifouling finish for all types of vessels, from workboats to daysailers.

AF-33 has self-polishing, copolymer technology which provides a continuous release of biocide, even when tied to the dock – for constant antifouling protection. No need to be moving through the water to expose fresh biocide!

AF-33 is suitable for use on all types of boats from daysailers to powerboats to tugs and barges, in fresh or salt water.

AF-33’s harder ablative finish lasts longer on higher speed boats, and is abrasion resistant to withstand maintenance scrubbing without removing paint, and trailering and dry storage without coating damage.

• Durable multi-season protection

• Longer lasting protection on high speed vessels

• 33% high purity cuprous oxide

• Copolymer controlled release technology allows more protection using less copper

• Ablative finsh reduces paint buildup with repeated applications

• Reliable color consistency for color matching

• Consistent viscosity for better flow and rolling ability

• May be applied over many ablative antifouling paints

• Apply by brush, roller (3/8″ nap, solvent resistant), or spray

• Cleaner and thinner for brush or spray: Seahawk 2033 Reducer

• Theoretical coverage is 359 ft²/gallon; 2 coats recommended, 3 at waterline and other high wear areas; 56% solids (by volume)

When overcoating a previously painted hull, refer to the Compatibility Chart image in this entry.