An ablative antifouling bottom coating especially formulated for inflatables and dinghies.
MDR’s 787 Bottom Coating is a flexible vinyl, water-based antifouling coating containing cuprous oxide for protection against barnacles and other marine growth in fresh and mid-temperature range saltwater.
It can be used on most inflatable materials including Hypalon, PVC and rubber, as well as on fiberglass or wood dinghies
Cuprous oxide (Cu₂O) biocide: 26.4% concentration
Easy to apply by brush or roller. Easy clean-up with water
No limit on time out of water if the dinghy is hauled
Inflatables can be deflated and loosely rolled without cracking the coating
Theoretical coverage: one quart will provide two coats of protection for the average eight to ten foot inflatable – approximately 140 sq ft
Apply 2 coats; 4 hours between coats at 70°F; wait 24 hours before launching
Do not use below 50°F
Only available in black
Technical Specifications
| Weight | 3.00 lbs |
|---|---|
| Dimensions (L × W × H) | 12.00 × 12.00 × 12.00 in |
