Pro-Cure Topcoat Accelerator X-138 Brush or Spray

Pro-Cure X-138 “Slow” (Inhibited) Accelerator additive may be used to decrease dry and cure times in Awlgrip Urethane Topcoats and Awlcraft 2000 Topcoats to 6 to 8 hours (@77°F).

Pro-Cure X-138 may be used in either brush or spray applications. Do not use in Awlgrip primers.

Mixing instructions for Pro-Cure X-138 (73015) for spray or brush applications — 1/2 oz per gallon of mixed topcoat color base + converter. This is the maximum you can add; lesser quantities may be sufficient.

This is equivalent to 6 capfuls if measured using the screw top cap.

There is no induction time after adding and mixing.

Pro-Cure X-138 may be used in either brush or spray applications.

Recoat times — If mixed at full amount, may be recoated or taped in 6 – 8 hours at 77°F and 50% relative humidity.

Drying time/pot life shortening results will vary depending on temperature and the Reducer used – see product instructions.

Do not use when application surfaces are hotter than 105°F or colder than 55°F.

Do not use in primers.